The GC FujiCEM Evolve – Simple & Strong


Read Time:3 Minute, 16 Second

Resin-modified glass ionomer (RMGI) cements are the go-to option for placing porcelain-fused-to-metal (PFM) crowns, full-cast crowns, and high-strength ceramic restorations.

GC America has a long history of producing several generations of RMGI cements, each bringing marked improvements over previous iterations. The latest addition to their RMGI cement lineup, GC FujiCEM® Evolve, possesses significant advantages over all other RMGI cements.

GC FujiCEM® Evolve is engineered with simplicity, strong adhesion, and simple cleanup in mind. Several advances have made this a great option for luting retentive zirconia, lithium disilicate, or metal-based restorations. First, GC FujiCEM® Evolve has been engineered with a tack-cure capability, allowing the practitioner to place the restoration, tack cure, and remove excess cement quickly and effortlessly. Second, the cement has been designed with high radiopacity, allowing for easy identification on radiographs. Finally, the chemistry has been created to enhance luting to zirconia restorations compared with previous generations and other brands. This is a huge advantage because the market has shifted so heavily toward the use of various forms of zirconia restorations.


  • Zirconia crowns and bridges
  • Composite inlays, onlays, crowns, and bridges
  • Lithium disilicate inlays, onlays, and crowns
  • Metal and PFM crowns and bridges

Recently, 18 clinical evaluators with Catapult Education assessed GC FujiCEM® Evolve. Among the evaluators, 89% used the product with the tack-cure method and reported that cleanup was easy to very easy. In addition, 100% found working time to be adequate and 94% felt the setting time was appropriate. Also, 89% felt that the viscosity of the material was just right. Following the review and assessment of all the findings, Catapult Education granted this product its Vote of Confidence, an honor reserved for products that receive overwhelmingly positive reviews and feedback.

Catapult Group’s Comments:

“First RMGI this simple.”

“Works very well.”

“I used the tack cure prior to cleanup, which is a big advantage of Evolve to me.”

“My favorite cement. No question.”

“Nice addition to the GC line of cements.”

Figure 1

This patient presented with a failing PFM-fixed dental prosthesis from #12 to #14, replacing #13. The prosthesis had recurrent decay on the distal-most aspect of the posterior retainer. The fixed dental prosthesis had been in service for over 20 years. The existing prosthesis and decay were removed and both preparations were refined

Figure 2

The dental arches were scanned using a True Definition (Midmark) scanner

Figure 3

And a monolithic zironia fixed dental prosthesis with a modified ridge lap pontic was fabricated (Figure 3).

Figure 4

After completion of the try-in and adjustment of proximal contacts and occlusion, the zirconia prosthesis was sandblasted with aluminum oxide in preparation for cementation. If less than desirable retention is present, one could incorporate the use of a zirconia primer to further enhance the bond of the RMGI cement (GC FujiCEM® Evolve) to the zirconia surface. In this case, this step was not necessary because both preparations possessed adequate height and retention for a conventional cementation protocol.

The new mixing tip design of the GC FujiCEM® Evolve delivery system is simple and predictable and ensures that both components of the cement will be perfectly mixed. The preparations were isolated and dried for cementation. Both abutments are loaded with GC FujiCEM® Evolve.

Figure 5

The cement will autopolymerize in about 4.5 minutes, giving the clinician plenty of time to seat the prosthesis. Once the prosthesis was seated, each line angle was light cured (tack cured) for 3 seconds using a VALO (Ultradent Products, Inc) curing light.

Figure 6

The tack curing of the cement will render it in an ideal doughy consistency for easy removal and allow for atraumatic recovery of excess cement. This stage of the cementation process was accomplished using a pointed scaler.

Case courtesy of Dr. Lou Graham.

Check out the full article on Catapult’s website:

Patterson DentalPatterson Dental

About Post Author

Patterson Dental

At Patterson Dental, we are committed to partnering with dental practices of all sizes to help oral health professionals practice extraordinary dentistry. We do this by living up to our promise of Trusted Expertise, Unrivaled Support every day.


Source link

About Author


We Bring The Latest Articles Every Day Here In This Website You Will Find Tons Of Articles Related To Dental Care

Leave a Comment